Blog

Discover our latest articles and blogs

Engineers: STL vs STEP for CNC, Send STEP to Avoid a Week of RFIs
September 18, 2026

Engineers: STL vs STEP for CNC, Send STEP to Avoid a Week of RFIs

Send STEP, not STL, for CNC jobs. STEP preserves exact geometry and units so shops quote and inspect faster. Includes a short handoff checklist engineers...

Build Level 3 PPAP in 7 Steps for CNC Machining Shops
September 17, 2026

Build Level 3 PPAP in 7 Steps for CNC Machining Shops

A shop-ready Level 3 PPAP playbook for CNC shops: follow seven concrete steps, prepare the right documents, and avoid the common rejection triggers.

Catch Drift by Part 200: SPC for Prototype Machining, Shop Floor SOPs
September 16, 2026

Catch Drift by Part 200: SPC for Prototype Machining, Shop Floor SOPs

Practical, standards-backed SPC for prototype and short-run machining. Machinist-led SOPs, chart selection, sampling plans, and a step-by-step shop-floor...

6 Shop Proven Specs for NPT vs NPTF Dry Seals Without Tape
September 15, 2026

6 Shop Proven Specs for NPT vs NPTF Dry Seals Without Tape

CNC shop guidance on NPT vs NPTF: when to specify dryseal, inspection and assembly tips, and a six point checklist to prevent threaded leaks.

0.1875 inch Rule: Inside Corner Radius Formulas and Shop Measurement
September 14, 2026

0.1875 inch Rule: Inside Corner Radius Formulas and Shop Measurement

Learn formulas, shop measurement, and cutter size limits (0.1875 inch finishing) to specify inside corner radii that machine correctly.

Shops: Reaming vs Boring, Bore First Then Ream to ±0.0002
September 13, 2026

Shops: Reaming vs Boring, Bore First Then Ream to ±0.0002

Practical shop workflow for precision holes. Learn when to bore to establish position and when to ream to ±0.0002 inches for final size and finish.

Payback in a Year: Shop Tested Quick Change Fixturing for CNC Shops
September 12, 2026

Payback in a Year: Shop Tested Quick Change Fixturing for CNC Shops

Shop tested steps to pilot zero point quick change fixturing, retrofit existing tables, and calculate payback, often within a year for shops with daily...

Fix Bonus Tolerance Math for MMC and LMC, 0.004 Example for Engineers
September 11, 2026

Fix Bonus Tolerance Math for MMC and LMC, 0.004 Example for Engineers

Calculate bonus tolerance for MMC and LMC with a 0.004 worked example, step by step inspection math, and shop floor checks you can reproduce.

3 Rules to Avoid Scrapping Parts: Thread Milling vs Tapping for Shops
September 10, 2026

3 Rules to Avoid Scrapping Parts: Thread Milling vs Tapping for Shops

Three shop tested rules to choose thread milling or tapping and avoid scrapping parts. Decision checklist, setup checks, and recovery tips for real shop work.