Blog

Discover our latest articles and blogs

CNC Drawing Standards: What to Put on Your Print
October 24, 2026

CNC Drawing Standards: What to Put on Your Print

A practical guide to CNC drawing standards: ASME Y14.5, title blocks, tolerances, revision control and a checklist to send a machinist a print that quotes fast.

Tapping Aluminum: Drill Sizes, Taps, Lubricant and Technique
October 23, 2026

Tapping Aluminum: Drill Sizes, Taps, Lubricant and Technique

How to tap aluminum cleanly: pick form or cut taps, set thread engagement, choose lubricant, and avoid built-up edge and broken taps, from a CNC shop.

How to Prevent Thread Galling on Stainless and Other Fasteners
October 22, 2026

How to Prevent Thread Galling on Stainless and Other Fasteners

Thread galling comes from heat, pressure and matched alloys. Learn how to prevent it with hardness gaps, hand tools, anti-seize and torque corrections that work.

Threadlocker on Aluminum: Which Grade, and How to Apply It
October 21, 2026

Threadlocker on Aluminum: Which Grade, and How to Apply It

Yes, threadlocker works on aluminum. Learn which grade to pick (blue, purple or red), how to prep threads, and the mistakes that strip aluminum threads.

Concentricity vs Runout: Which GD&T Control to Call Out
October 20, 2026

Concentricity vs Runout: Which GD&T Control to Call Out

Concentricity vs runout in GD&T: what each controls, how each is inspected, why ASME dropped concentricity, and how to pick the right callout for your part.

Repeatability in Machining: What It Means and How to Get It
October 19, 2026

Repeatability in Machining: What It Means and How to Get It

Repeatability in machining explained: how it differs from accuracy and reproducibility, what ISO 230-2 measures, and how to hold it across a short run.

Prototype Testing for CNC Shops: Faster Iteration With Probing
October 18, 2026

Prototype Testing for CNC Shops: Faster Iteration With Probing

See how CNC shops choose prototype tests for tolerance, fatigue, fit, and environmental risks, then use probing and acceptance criteria to speed iteration.

Bead Blasting Before Anodizing for CNC Shops: Prevent Patchy Finish
October 17, 2026

Bead Blasting Before Anodizing for CNC Shops: Prevent Patchy Finish

Learn how media choice, blasting pressure, and post blast cleaning shape anodized aluminum, then see what CNC shops should specify for sample approval and QA.

Gage R&R for CNC Shops: What 3 Operators and 10 Parts Reveal
October 16, 2026

Gage R&R for CNC Shops: What 3 Operators and 10 Parts Reveal

Learn how Gage R&R separates measurement noise from part variation, then use operator, fixture, and part selection choices to plan a CNC shop study.