Blog

Discover our latest articles and blogs

Engineering Change Control: How to Run It Step by Step
November 2, 2026

Engineering Change Control: How to Run It Step by Step

Learn how engineering change control works: the steps, what an ECR, ECN and ECO each do, who approves, and how a small CNC shop can run it without heavy software.

Titanium Machining: How to Cut It Without Wrecking Tools
November 1, 2026

Titanium Machining: How to Cut It Without Wrecking Tools

Why titanium fights back at the spindle, and the speeds, chip loads, coolant, workholding and finishing habits that keep tools alive and parts in tolerance.

Aluminum Thread Design: Geometry, Engagement and Inserts
October 31, 2026

Aluminum Thread Design: Geometry, Engagement and Inserts

How to design threads in aluminum: pick the standard, set engagement depth, choose cut or formed threads, and know when a wire insert is the better answer.

Machining After Coating: What to Know Before You Cut
October 30, 2026

Machining After Coating: What to Know Before You Cut

Should you machine before or after anodizing or powder coating? Learn when cutting coated parts makes sense, how to do it cleanly, and what to check.

Machined Part Inspection: Methods, Timing and Tools
October 29, 2026

Machined Part Inspection: Methods, Timing and Tools

How machined part inspection works: what to check, when to check it, which dimensional inspection tools fit which features, and how to record results.

Coolant Selection for Machining: Match Fluid to Material
October 28, 2026

Coolant Selection for Machining: Match Fluid to Material

How to choose machining coolant by material and operation: fluid types, aluminum-safe choices, delivery methods, upkeep and safety, from a working CNC shop.

Job Shop vs. Production Shop: How They Really Differ
October 27, 2026

Job Shop vs. Production Shop: How They Really Differ

A job shop and a production shop make parts in opposite ways. See how they differ in volume, cost and lead time, and which one fits your next project.

Kickstand Sinking Fix: Stop Your Stand Digging In
October 26, 2026

Kickstand Sinking Fix: Stop Your Stand Digging In

Why a kickstand sinks into hot asphalt or soft dirt, and how to fix it with a foot enlarger, a puck or smarter parking, plus notes for small electric dirt bikes.

Lathe Workholding Options: Chucks, Collets, Mandrels
October 25, 2026

Lathe Workholding Options: Chucks, Collets, Mandrels

Compare the main lathe workholding options: jaw chucks, collets, mandrels, faceplates and centers. Learn what each does best and how to pick one.